Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to protect cars from key cloning or hacking, is a small device that can be installed without causing damage to your vehicle. It will not allow you to start your car unless you have entered the correct sequence of keys in your vehicle. ghost 2 immobiliser fitting near me is similar to the mobile password.
Stop/Start
Ghost Immobilisers prevent vehicles from being stolen by stopping the engine from running unless it receives the correct PIN code. This is done without modifying the vehicle, and is largely undetectable by thieves. The unit connects directly to the ECU via the CAN databus to lock a vehicle. This is similar to the one used by car makers for many years. However, thieves cannot overcome it using a brand new key, or key relay technology, like they can using factory-installed systems.
Ghost is compatible with any vehicle with an engine, including motorhomes, vans, cars and caravans as well as bikes. The same system can also be utilized on electric vehicles. It is a great alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will block all buttons in your vehicle and stop the ignition from starting without a PIN code having been entered prior to. You can enter the code manually or through the Android or Apple app. If the wrong code is entered, the app will show an indicator light. The Ghost will then not allow the vehicle be started again. This is a great deterrent. if the vehicle can't be started, the burglar will then move on to a different area of.
The Ghost is small, weatherproof device that can be concealed in the most difficult to reach areas of your car. Installation takes between 20 and 30 minutes for each vehicle. It is also simple to take off if you decide to switch vehicles, or even give it to a service center or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by a number of insurance companies. It also has an emergency lock that is secure Pin Code Override, and the Service/Valet feature that can be activated by pressing a button on the app or by using your key fob.
Disarm
In contrast to the mechanical anti-theft devices, which are able to be removed and reinstalled, ghost immobilisers are concealed and integrated into the car. Even if they were found in the car, thieves wouldn't be able start the car. They are nearly impossible to bypass or hack. This is because ghost immobilisers prevent key blocking, signal jamming, and device spoofing - techniques that are frequently used by thieves to gain access to cars fitted with standard immobilisers.
An immobiliser works by sending an instruction to the ECU (electronic control unit). If the wrong code is received and the vehicle does not start as the engine won't start. Although it is possible to disable the ghost immobiliser using an application program, this would be very laborious and time-consuming. Only an authorized installer is able to install and use the software.
The Ghost immobiliser, which is a tiny system, is hidden within the wiring loom of your vehicle. It is not visible to the naked eye after it has been installed. It won't show up on diagnostic systems, there aren't LED indicators, and it does not connect to the engine via the OBD port. It communicates in silence via the CAN data loop.
The system will block the vehicle from starting until it receives a user defined PIN code sequence. This code is entered using buttons on the steering wheel or door panels, or centre console. This is a safer method of protecting your vehicle since it doesn't require the use of keys or remote control.
In addition to this Ghost offers a service mode which can be activated through the application on your mobile phone. This allows you to hand over your keys to someone else for service or valet parking without entering the disarm sequence.
It is not recommended to remove the system from your Ghost by yourself, regardless of whether it's in service mode. This could damage your engine. It is recommended to speak with a TASSA-verified installer who can safely and effectively remove the system. Our most recent GHOST II immobilisers also include a special QR fingerprint sticker that is hidden in various locations of your vehicle. these are linked to our international security register - in the event that the system is removed and is sold on the black market, it will be linked back to its original owner.
Anti-Hijack
The anti-hijack function is a key feature of the Ghost Immobiliser 2. It functions like smart keys and is one of the most secure methods to ensure your car is safe from theft. The Ghost system will automatically switch on the hazard lights and stop the engine when the ignition is on and the vehicle is in a stationary position. This allows the driver or passengers enough time to press a hidden security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to start.
The Ghost system, unlike many competitors, utilizes an electronic timer and controller which shuts down the valve for shut-off of fuel 14 after a predetermined period of time. This happens regardless of whether the ignition remains on. The delay time must be long enough for the hijacked vehicle owner to get away, and stay a safe distance from the car that it is stuck before the system is activated.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost, it has an extra security level that blocks common hacking methods employed to gain access to modern vehicles, such as relay attacks keys range extending, relay attacks and ECU swapping. This is due to the fact that the Ghost system is completely silent and doesn't emit any signals that could be detected by thieves using RF scanning or code grabbing technology.
The Ghost system comes with the valet or service mode that allows your vehicle to temporarily be started and driven without the requirement for a PIN code. This is great when you park your vehicle and only need to leave it briefly for a few minutes, like to open the garage door or place groceries in the boot. The system will end the service mode according to speed and time or by a simple PIN code input process. This gives you total peace-of-mind that only YOU can drive your car!
Keyless Entry
With the increasing trend of contactless car theft, many people are considering additional security options. This is especially true for those who have put time or money into personalising their vehicles and own expensive or rare vehicles. An add-on immobiliser can be an effective way to avoid this kind of theft since it will stop your vehicle from starting unless the proper pin code is entered alongside your key fob.
Immobilisers are made to block a variety of vehicle circuits which include those that control the starter motor and fuel pump. They can also shut off the alarm for cars in order to draw attention and ward off potential thieves.
These devices communicate with the engine control unit (ECU) via the CAN data circuit, and they stop the thief trying to bypass it by putting in a new ECU or by using an engine key programmer. These immobilisers are installed discreetly and leave no marks in your vehicle. They are also unnoticeable by sophisticated tools used by thieves.
The Ghost immobiliser is different from other systems which require the driver to wear a tag or an app. Instead, you are able to choose your personal pin sequence by pressing the pattern on your door, steering panel, or centre console. The pin can be easily changed to make the device as secure as a bank card. It's also more difficult to crack because it takes up to 20 presses.
Ghost also offers Valet/Service mode, which allows you to disable it if you plan to give your vehicle for valet parking, or service. This allows the system to operate within the parameters, such as a 30-mph speed limit. It can be activated with the original key or appropriate entry code.
This makes it the most efficient and secure aftermarket CAN-based immobiliser on the market and is fully insurance approved by Thatcham as an add-on for your car when installed by one of our accredited installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels, an ISR contact card with your unique QR code and an emergency code that is secure that can be kept in the purse or wallet of your vehicle.